home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SuperHack
/
SuperHack CD.bin
/
PHREAKING
/
crimson.txt
< prev
next >
Wrap
Text File
|
1998-07-29
|
2KB
|
68 lines
-----------
Crimson Box
-----------
------------
Introduction
------------
The Crimson Box is very simple device that will allow you to put
someone on hold or make your fone busy with a large amount of
ease. You flip a switch and the person can't hear you talking.
Flip it back and everything is peechy.
---------
Materials
---------
(1) 100 ohm or less resistor
(1) SPDT toggle switch, On-On
(3) feet of good wire
Wire cutters
Solder and soldering iron
---------
Schematic
---------
-----------black wire on line---------
--------+ red wire on line +------
--------!--+/\/\/-green wire---!------
--------!--! yellow wire-------!------
! ! !
+--!------+ !
+----+ ! +----------+
! ! !
1 2 3
------------
Construction
------------
Ok. The '/\/\/' is the resistor. And '1 2 3' is the switch where
the numbers are the poles on the switch. Notice you leave the
black and yellow wires alone. You DO NOT cut them!
Strip the red and green wires so you've got about an inch of bare
wire. Solder some of the extra wire and follow the schematic. You
should have the resistor on the green wire with an extra piece of
wire coming from one leg of it. The other leg goes to the other
end of the green wire. You should solder the green wire to the
left pole of the switch and the red to the middle and the other
end of the red to the right pole.
Now, lift up the phone. If all you get is an annoying buzz then
throw the [switch and you should get a dial tone. If not, don't
worry and just follow the instructions and schematic again.
+++EOF